IKAR Safety Harness – single rear fall arrest attachment point, to EN361:2002

45mm Webbing Fall Arrest Safety Harness with a single rear fall arrest ‘D’ ring attachment point, with the leg loops, chest strap and shoulder straps all adjustable in length. The adjuster buckles on the legs and chest are a ‘quick release’ type where one part of the buckle connects into the other and is released by depressing two side latches. On the shoulders there is a floating bar adjuster buckle so the length is adjusted through and up, so as to give maximum adjustment. Due to the adjustment capabilities of the harness is comes in one size and fits across all sizes. Elasticated loops are fitted to the shoulder strap and chest strap assemblies so the ‘tail ends’ can be retained neatly. 

Wearers of Fall Arrest Safety Harnesses should be trained in its safe use and the applications it is designed to be used in. This should include fit and adjustment, selection of attachment devices and selection of a suitable anchor point.

All fall protection equipment made from synthetic fibres available for used and worn by an employee should be inspected by the User prior to use each and every time it is used (for which they should have been trained to do so) and at least every 6 months should be subjected to a Detailed Inspection by a competent person. The actual frequency of the Detailed Inspection by the competent person should be deemed through ‘risk assessment’ taking into account the frequency of use and the environment it is being used in. The competent person carrying out the Detailed Inspection should have specific training to inspect fall protection PPE.

This type of Fall Arrest Safety Harness is also sometimes called a Safety Harness, Fall Harness, Arrester Harness, Full Body Harness, Work Harness

Size: Standard