V-TUF RAPID VTS1210HPC XL Mobile Hot Pressure Washer 240V 100Bar - [VT-RAPIDVTS1210HPC] - (LP)

V-TUF RAPID VTS1210HPC XL Mobile Hot Pressure Washer 240V 100Bar - [VT-RAPIDVTS1210HPC] - (LP)

• Stainless Steel Cover, Chassis & Boiler Casing
• Working Pressure 100BAR, 12 L/Min 
• V-TUF Super Series Pump XHDM300SS 200bar Pump Pressure 
• Air Cooled Motor - Motor Power (Hp @ 1450rpm): 3hp 2.2kw
• Chemical Feature: High Pressure Application (Adjustable Dosage) 
• iDPS –intelligent Digital Protection System – Low Fuel, Leak & Dry Running Protection
• Control Panel With Indicator Lamps
• Run System Protection: Delayed Auto Stop/Start With 1 Hour Shut Down
• Energy Efficient Burner – Can also Use HVO Fuel which Reduces GHG emissions by 90%
• Robust 24L Fuel Tank – Removable & Easy to Clean
• Water Temperature: 0-150°C
• Power Supply (Voltage): 240v  (Single Phase) - Comes With 13Amp 3 Pin Plug As Standard
• Anti-Fatigue Soft Grip Easy Pull tufGUN Trigger With Quick Release – Easily swap attachments
• 1000mm Lance With Moulded Grip And Rubber Nozzle Holder
• Highly Visible Yellow WASHFLEX Longlife Jetwash Hose
• DuraKLIX MSQ quick-release fittings: durable and robust. And five times faster than screw fittings.
• Water Supply Type: Mains feed - can be converted to suction
• Weight: 140kg
• Dimensions (L X W X H) Cm: 118 X 73 X 87cm

• Delivery time: 2 working days. All machines are Pre-delivery inspected and tested before dispatch. We aim to give you peace of mind, for trouble free operation from the start.
• VTUF The RAPID VTS1210 HPC offers you the following advantages and benefits:
• Quieter running - Sound Level - Sound Level : up to 10% less than some of its competitors
• Tough, easy running pump - The proven V-TUF XHDM300SS low revving European pump is 200 bar rated with a heavy duty crankshaft design with hard wearing ceramic plungers and a brass pump head. Servicing is straight forward and spares availability is excellent.
• The XHDM300SS pump is lubricated with top specification V-TUF PRESSURE LUBE ( PL500 ) which contains MSM which virtually eliminates friction and wear. Pump lube level visible from outside the machine.
• Pressure can be regulated and the regulation wheel is direct on the pump and easy to reach.
• High efficiency double pass heat exchanger with 3 second purge time offers you hotter water while using less fuel and clean combustion.
• The simple but robust stainless steel control panel is easy to operate and maintain with clear visible warning lights. The control circuit is a safe 24 volt low tension electrical control with IP56 electric protection.

• Delayed Auto stop (30 second delay stop motor with immediate start) – reduces wear on motor and pump
• The machine will shut down after 1 hour is not used – safety and reduced fire risk
• Low Water Cut-Out - reducing expensive damage from water shortage.
• The machine will stop if the motor over heats
• Water leak detection shut off - reducing unnecessary wear and expense.
• Safety pressure valve : visible and direct on the pump (following all European regulations).
• Double lance holder on both sides of the cover.
• Low Fuel Cut Out - to prevent damage to the fuel system
• 4 x large robust wheels – ideal for rough terrain
• Quick release KTQ 350 bar Optigun lance system with 10m of hose and DURAKLIX ® 10m MSQ Heavy Duty coupling system,
• Chemical injection system with Micro-Controllable Detergent flow regulator
• XHDM300SS Pump service kits: 

• 100% 304 Stainless Steel Chassis - with crane attachment points
• Large 24ltr easy fill, removable fuel tank.
• Chemical injection system.
• Bypass valve & safety valve
• Pressure gauge.
• Burner control with flow switch and thermostat
• 24v low tension control system.