V-TUF RAPID VTS2115HPC XL Mobile Hot Pressure Washer 415V 150Bar - [VT-RAPIDVTS2115HPC] - (LP)

V-TUF RAPID VTS2115HPC XL Mobile Hot Pressure Washer 415V 150Bar - [VT-RAPIDVTS2115HPC] - (LP)

• Delivery time: 10 working days. All machines are Pre-delivery inspected and tested before dispatch. We aim to give you peace of mind, for trouble free operation from the start.
• VTUF The RAPID VTS 21150HPC offers you the following advantages and benefits:
• Quieter running - Sound Level - Sound Level : up to 10% less than some of its competitors
• Tough, easy running pump - The proven V-TUF XHDM450 low revving European pump is 200 bar rated with a heavy duty crankshaft design with hard wearing ceramic plungers and a brass pump head. Servicing is straight forward and spares availability is excellent.
• The XHDM450 pump is lubricated with top specification V-TUF PRESSURE LUBE ( PL500 ) which contains MSM which virtually eliminates friction and wear. Pump lube level visible from outside the machine.
• Pressure can be regulated and the regulation wheel is direct on the pump and easy to reach.
• High efficiency double pass heat exchanger with 3 second purge time offers you hotter water while using less fuel and clean combustion.
• The simple but robust stainless steel control panel is easy to operate and maintain with clear visible warning lights. The control circuit is a safe 24 volt low tension electrical control with IP56 electric protection.
• V-TUF DPS (Digital Protection System) means:
• Delayed Auto stop (30 second delay stop motor with immediate start) – reduces wear on motor and pump
• The machine will shut down after 1 hour is not used – safety and reduced fire risk
• Low Water Cut-Out - reducing expensive damage from water shortage.
• The machine will stop if the motor over heats
• Water leak detection shut off - reducing unnecessary wear and expense
• Safety pressure valve : visible and direct on the pump (following all European regulations).
• Stainless steel double lance holder on both sides of the cover.
• Low Fuel Cut Out - to prevent damage to the fuel system
• Complete machine safety shut down if the unit is not used for an hour
• 4 x large robust wheels – ideal for rough terrain
• Quick release KTQ 350 bar Optigun lance system with 10m of hose and Opti-spare ® 10m KWIK-SWIVEL coupling system,
• Chemical injection system with Micro-Controllable Detergent flow regulator.

• WATER FLOW(LITRES PER MINUTE): 21 L/min
• WATER SUPPLY TYPE: Suction only
• PRESSURE (BAR/PSI): 150/2200
• MOTOR POWER (HP @ 1400RPM): 7.5
• CHEMICAL FEATURE: Low Pressure
• RUN SYSTEM PROTECTION: AUTO STOP/START WITH 1 HOUR SHUT DOWN
• WATER TEMPERATURE: 0-150°C
• POWER SUPPLY (VOLTAGE): 415V
• WEIGHT: 150kg
• DIMENSIONS (L X W X H) cm: 118 X 73 X 87cm

• Low Rev Motor With Thermal Protection
• Fuel, Water and detergent protection filters
• 3 Second delayed boiler star up.
• Low Water Cut-Out.
• Low Fuel Cut Out
• Complete machine shut down (1Hr – No use)
• Power, Fuel, Water, Shutdown mode dashboard
• 100% 304 Stainless Steel Protective Cover
• 100% 304 Stainless Steel Chassis - with crane attachment points
• 4 large robust wheels for tough terrain
• Large 24ltr easy fill, removable fuel tank.
• Large High efficiency double pass heat exchanger
• Chemical injection system
• Steam stage (Optional)
• Proven European XHDM450 Crank shaft pump with ceramic and brass and components. Excellent spares availability.
• Low rev Auto Stop/Start motor.
• Bypass valve & safety valve
• Pressure gauge.
• Burner control with flow switch and thermostat
• 24v low tension control system.
• Comes with efficient DuraKlix 10m Quick swivel hose and gun system.