Drager X-Plore 8500 Powered Air-Purifying Respirator - R59500 - [BL-750563]

Key Features:

• Intelligent electronics automatically identify the connected headpiece and adjust the minimum airflow accordingly.
• Three selectable airflow levels: 115 / 130 / 145 L/min for half and full-face masks, and 170 / 190 / 210 L/min for hoods, helmets and visors.
• Lithium-ion battery technology, with typical operating times of 4–8 hours using the standard battery or 8–20 hours using the high-capacity battery, depending on the configuration. Battery not included.
• Visual, audible and vibration alarms provide clear warnings during operation.
• IP65 protection rating: dust-tight and resistant to water jets from all directions.
• Approximate weight of 1.4 kg, including the standard battery and splash guard.
• Modular system designed for straightforward cleaning, maintenance and component replacement.

Regulations and Approvals:

• EN 12941: TH3 classification when used with approved Dräger X-plore 8000 hoods, helmets, visors and welding visors.
• EN 12942: TM2 classification when used with the Dräger X-plore 4740 half-mask.
• EN 12942: TM3 classification when used with approved Dräger X-plore 6000 or Dräger FPS 7000 full-face masks.
• IP65 ingress protection rating.
• System approvals are also available under AS/NZS 1716:2012 and NIOSH 42 CFR 84, subject to the specific configuration and market.

Compatible Products:

• The R59500 blower unit forms part of the modular Dräger X-plore 8000 respiratory protection system. Compatibility always depends on the approved system configuration.
• Dräger X-plore 8000 hoods, helmets, protective visors and welding visors.
• Dräger X-plore 4740 half-masks.
• Dräger X-plore 6000 full-face masks and Dräger FPS 7000 full-face masks.
• Approved X-plore 8000 breathing hoses
• Dräger X-plore 8000 standard or high-capacity batteries, chargers, carrying systems and approved particle, gas or combination filters.